|
|
Packard Bell Victory M/Board
Specification
- Battery : In 24 pin DIP module
- BIOS : 2 x 64KB - Phoenix BIOS. Setup (ctrl)-(alt)-(esc)
- Cache : N/A
- Clock/Driver : 24pin DIP socket
- Cover Removal : 2 screws on sides lower rear. 3 screws on back panel top.
- CPU : 80286-12 Mhz. Keyboard switches (ctrl)-(alt)-(+) = 12 MHz, (ctrl)-(alt)-(-) = 6 MHz.
- Drive Cavities : 2 x 5 ¼" Half (exposed), 1 x 5 ¼" Half (enclosed), 1 x 3 ½" Half (exposed / vertical).
- I/O Expansion slots : 4 X 16-bit ISA, 1 X 8-bit ISA
- Interfaces :
- Parallel : 1 X DB-25
- Serial : 2 X RS232,DB-9
- VGA : 1 X 15-pin
- Mouse : PS/2
- Keyboard : PS/2
- Keyboard : 101 Key enhanced, PS/2
- Power Supply : 145 watts, 120v:4A:60Hz:Outlet 1.0A. 220v:2A:50Hz:Outlet 0.5A
- RAM : Standard on motherboard 1MB, Maximum on motherboard 4MB (use 256Kb,1MB 9-bit SIMM, 100ns).
- Speaker : Piezoelectric (soldered on motherboard)
- Video : Built-in Paradise Super VGA 256Kb. 800 X 600 16 colours.
Jumpers
Jumper | Function | Pins | Description |
W3 | Monitor Type | 1-2 2-3 | Monochrome * Colour |
W4 | FCD Enable | 1-2 2-3 | Disabled * Enabled |
W9 | Co-Processor | 1-2 2-3 | 80c287-12 80286-6 |
W11 | On-Board VGA | 1-2 2-3 | Disabled * Enabled |
W12 | IDE Access LED | 1-2 2-3 | Disabled * Enabled |
W16 | PS/2 Mouse Port | 1-2 Open | Enabled Disabled |
Upgrades
- Cache Memory : This system does not support cache memory.
- Maths Co-Processor : An 80287-6 or 80C287-12 can be installed in socket U44. The jumper at location W9 must be set. Jump pins 1-2 for the 80287-12 or pins 2-3 for the 80287-6.
- RAM : Standard on motherboard 1MB, Maximum on motherboard 4MB (use 256Kb, 1MB 9-bit SIMM, 100ns). Base memory 640kb. Shadow BIOS Enabled takes 128kb off Extended Memory. No jumper settings required.
- Video Memory : This system is NOT VESA compatible. This system has 256k video memory soldered (not upgradeable).
|
|