|
|
Packard Bell Kourou 2 M/Board
Specification
- Audio: SigmaTel STAC9700 Codec
- Bios : AMI BIOS
- Chipset : The Intel 810E chipset consists of the Intel 82810E Graphic Memory Controller Hub (GMCH) and the 82801 I/O Controller Hub (ICH).
- CPU Support : Socket 370. Supports -
- Supports 66MHz FSB Intel Celeron PPGA processor at 766 MHz maximum.
- Supports 100MHz FSB Intel Celeron FC-PGA processor at 900 MHz maximum.
- Supports 100MHz FSB Intel PIII Coppermine FC-PGA processor at 1.1 GHz maximum.
- Supports 133MHz FSB Intel PIII Coppermine FC-PGA processor at 1.0 GHz maximum.
- Expansion Slots : Two 32-bit Master PCI Bus slots are available on the PCI Riser Board. 1 Audio Modem Riser slot
- Form Factor : Specific (29.5 x 17.7cm)
- RAM : Two memory banks using two 168-pin unbuffered DIMMs. Supports a maximum memory size of 256 MB (64-bit technology) and 512 MB (128-bit technology) SDRAM in one or two DIMM sockets. Supports 3.3 V SDRAM DIMMs
- Video : Integrated in Chipset
Jumpers
Jumper | Configuration |
JP4 - BIOS Recovery | 1-2 : Normal operation (default) 2-3 : Safe Mode |
JBAT1 - Clear CMOS | 1-2 : Normal (default) 2-3 : Clear CMOS |
JKBV1 - Keyboard Wake | 1-2 : Keyboard wake up 2-3 : KB wake up disabled (default) |
JP4 - STR enable/disable | Close : STR enabled (default) Open : STR disabled |
JP3 - Onboard audio | 1-2 : Enabled (default) 2-3 : Disabled |
|
|