Packard Bell Columbia M/Board
Specification
- Audio: SigmaTel Technologies STAC9756T - audio codec
- Bios: AMI
- Chipset :
- SiS 650 IGUI HMAC 3D Graphic SDR/DDR
- SiS 961 MuTIOL Media I/O
- CPU Support : Socket MPGA 478B.
- Supports Intel P4 FC-PGA2 (0.18 Micron, 256K cache, 400 MHz FSB), 1.4 to 2.4 GHz
- Supports Intel P4 FC-PGA2 (0.13 Micron, 512K cache, 400 MHz FSB), 1.8 to 2.4 GHz
- Supports Intel Celeron FC-PGA2 (0.18 Micron, 128K cache 400 MHz FSB) 1.9 GHz
- 100 MHz (x4 = 400 MHz) data bus support (Quad-Bumped technology).
- Ethernet : Realtek RTL8100(BL) 10/100
- Form Factor : ATX 24.4 x 22.9 cm Form Factor.
- RAM :
- Supports 2 memory slots.
- Serial Presence Detect (SPD) support.
- Supports a maximum memory size of 512 MB (using 2x256 MB memory modules).
- Support only 2.5 V DIMM DDRAM configurations.
- Unbuffered type support.
- 266 Mhz DDR interface.
Jumpers
Jumper | Configuration |
CLR_CMOS | 1-2: Enable 2-3: Normal (default) |
SAFEMODE | 1-2: Normal (default) 2-3: Safe Mode |
Connectors
- 3x PCI slots
- 2x DB9 serial ports
- 1x DB25 parallel port with SPP, ECP, EPP, BPP modes
- 1x PS/2 keyboard port
- 1x PS/2 mouse port
- 4x USB connectors.
- 1x MIDI port
- 1x Microphone input (Mic-In)
- 1x Line-In
- 1x Line-Out
- 1x Aux In
- 1x RJ45 connector
- 2x IDE connectors
- 1x Floppy connector
- 1x CNR connector
Note: The CNR connector is a combo slot with the bottom PCI connector. Use either the CNR or the PCI connector; you cannot use both connectors at the same time.
Note: Keyboard and mouse ports are not swappable.
Front Panel Connector
Back Panel
A - PS/2 mouse port
B - PS/2 keyboard port
C - USB port 1
D - USB port 2
E - Serial port
F - VGA
G - Stereo line-out
H - Stereo line-in
I - Mono microphone-in
J - Parallel port
K - MIDI and game port
L - RJ45 LAN Connector
|