UKT Support logo

Home
What's New
Message Board
Contact Us

Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.


Easy Salon Management

File Extensions
Humour
Links
Microsoft
Reference
Scanner Support


 


Epson RX-80FT+/100+

The Epson RX-80FT+/100+ 9 pin dot matrix printers were introduced to replace the RX-80F/T and RX 100. They incorporated the additional ability to fit a cut sheet feeder and could print near letter quality when fitted with an optional interface board. They were replaced by the FX-80/100. Each printer has two sets of DIP (Dual In-line Package) switches located on the center back of the main circuit board, access to which require the removal of the printer cover. These switches control certain printer functions and default settings, the details of which are listed below.

Warning: Always disconnect the product from both the power source and the host computer before removing the printer cover.

Switch No.FunctionOnOff
SW1-1TypefaceCondensedNormal
SW1-2Decimal codes 128-159Graphics Character SetControl Codes
SW1-3Cut Sheet FeederValidInvalid
SW1-4Form Length12"11"
SW1-5Paper End DetectorInvalidValid
SW1-6Character SetSee Character Table
SW1-7Character SetSee Character Table
SW1-8Character SetSee Character Table
SW2-1Slashed ZeroValidInvalid
SW2-2Computer may put the printer on-line or off-lineInvalidValid
SW2-3Auto-line feedAuto LFNo LF
SW2-41" Skip-over perforationInvalidValid

Character Table

Character SetSW1-6SW1-7SW1-8
USAONONON
FranceONONOFF
GermanyONOFFON
UKONOFFOFF
DenmarkOFFONON
SwedenOFFONOFF
ItalyOFFOFFON
SpainOFFOFFOFF