Epson LX-86
The Epson LX-86 9 pin dot matrix printer was introduced to replace the LX-80. It offered faster print speeds than its predecessor and incorporated the IBM graphic character set. The printer has two sets of DIP (Dual In-line Package) switches located
on the rear panel of the printer. These switches control certain printer functions and default settings, the details of which are listed below.
| Switch No. | Function | On | Off |
| SW1-1 | Typeface | Condensed | Normal |
| SW1-2 | Character Table | Graphics | Italics |
| SW1-3 | Cut Sheet Feeder | Valid | Invalid |
| SW1-4 | Form Length | 12" | 11" |
| SW1-5 | Paper-out Sensor | Invalid | Valid |
| SW1-6 | Character Set | See Character Tables |
| SW1-7 | Character Set | See Character Tables |
| SW1-8 | Character Set | See Character Tables |
| SW2-1 | Slashed Zero | Valid | Invalid |
| SW2-2 | Computer may put the printer on-line or off-line | Valid | Invalid |
| SW2-3 | Auto-line feed | Auto LF | No LF |
| SW2-4 | Buzzer | Invalid | Valid |
Character Table
| Character Set | SW1-6 | SW1-7 | SW1-8 |
| USA | ON | ON | ON |
| France | ON | ON | OFF |
| Germany | ON | OFF | ON |
| UK | ON | OFF | OFF |
| Denmark | OFF | ON | ON |
| Sweden | OFF | ON | OFF |
| Italy | OFF | OFF | ON |
| Spain | OFF | OFF | OFF |
|