UKT Support logo

Home
What's New
Contact Us


Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.

File Extensions
Humour
Links
Microsoft
Reference
Scanner Support



 


Canon S450 Printer

Error Codes

Error ConditionIndicatorBeepsError
Code
Possible Solution
Paper Feed/DeliveryOrange2 Remove any paper jammed
Paper JamOrange3 Remove any paper jammed
Ink OutOrange4 Add Ink
BJ Cartridge MismatchOrange5 Re-install cartridge or replace it. See notes below for correct positions
NO BJ CartridgeOrange6 Re-install cartridge or replace it
BJ Cartridge ErrorOrange7 Re-install cartridge or replace it
Waste Full warningOrange8 Waste is almost full, needs service very soon
Auto Head Adjustment ErrorOrange9 Is there Black and Cyan ink ?
AutoAlignment requires Black and Cyan inks.
ROM Error1 x Orange10 Try unplugging the printer for 30 seconds, if not requires service.
RAM Error2 x Orange10 Try unplugging the printer for 30 seconds, if not requires service.
EEPROM3 x Orange106800Try unplugging the printer for 30 seconds, if not requires service.
Home Position4 x Orange105100Make sure nothing is blocking the cartridge movement, if not requires service.
Temperature Sensor5 x Orange105400Try unplugging the printer for 30 seconds, if not requires service.
Waste Full6 x Orange105B00Needs Service
Cartridge OverHeat7 x Orange105200Replace the BJ Cartridge(Printhead)
Cartridge Overheat8 x Orange105200Replace the BJ Cartridge(Printhead)
Cartridge Displaced9 x Orange105600Replace the BJ Cartridge(Printhead) or reinstall
 NoneNone5910Needs Service
 NoneNone5C00Needs Service

Notes - BJ Cartridge Mismatch

This error can be caused by installing the BJ Cartridges (Printheads) in the wrong position in the printer. The Correct combination are as follows

Left HolderRight Holder
BC-30BC-31
BC-32BC-31

Insure the Cartridge lock levers are down. Reinstall both Cartridges.

Waste Error Reset

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data