Canon BJC-6000 Printer
General
Cartridges
- BC-30 - Black Cartridge (Head)
- BCI-3BK - Ink Tank (Black)
- BC-31 - Colour Cartridge (Head)
- BCI-3C - Ink Tank (Cyan)
- BCI-3M - Ink Tank (Magenta)
- BCI-3Y - Ink Tank (Yellow)
- BC-32 - Photo Colour Cartridge (Head)
- BCI-3PBK - Ink Tank (Black)
- BCI-3PC - Ink Tank (Cyan)
- BCI-3PM - Ink Tank (Magenta)
- BCI-3PY - Ink Tank (Yellow)
Serial Number
Located inside printer, open access cover, left of center
Error Codes
Error Condition | Indicator | BEEPS | Error Code | Possible Solution |
Paper Feed/Delivery | Orange | 2 | | Remove any paper jammed |
Paper Jam | Orange | 3 | | Remove any paper jammed |
Ink Out | Orange | 4 | | Add Ink |
BJ Cartridge Mismatch | Orange | 5 | | Re-install cartridge or replace it. See notes below for correct positions |
NO BJ Cartridge | Orange | 6 | | Re-install cartridge or replace it |
BJ Cartridge Error | Orange | 7 | | Re-install cartridge or replace it |
Waste Full warning | Orange | 8 | | Waste is almost full, needs service very soon |
Auto Head Adjustment Error | Orange | 9 | | Is there Black and Cyan ink ? AutoAlignment requires Black and Cyan inks. |
ROM Error | 1 x Orange | 10 | | Try unplugging the printer for 30 seconds, if not requires service. |
RAM Error | 2 x Orange | 10 | | Try unplugging the printer for 30 seconds, if not requires service. |
EEPROM | 3 x Orange | 10 | 6800 | Try unplugging the printer for 30 seconds, if not requires service. |
Home Position | 4 x Orange | 10 | 5100 | Make sure nothing is blocking the cartridge movement, if not requires service. |
Temperature Sensor | 5 x Orange | 10 | 5400 | Try unplugging the printer for 30 seconds, if not requires service. |
Waste Full | 6 x Orange | 10 | 5B00 | Needs Service |
Cartridge OverHeat | 7 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
Cartridge Overheat | 8 x Orange | 10 | 5200 | Replace the BJ Cartridge(Printhead) |
Cartridge Displaced | 9 x Orange | 10 | 5600 | Replace the BJ Cartridge(Printhead) or reinstall |
| None | None | 5910 | Needs Service |
| None | None | 5C00 | Needs Service |
Waste Error Reset
1: Power off printer 2: Hold Resume button then press and hold POWER, the beeper will sound once. 3: Hold POWER and release RESUME 4: Press RESUME twice 5. Release Power button 6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange. 7: Press Power to set data
Notes - BJ Cartridge Mismatch
This error can be caused by installing the BJ Cartridges (Printheads) in the wrong position in the printer. The Correct combination are as follows
Left Holder | Right Holder |
BC-30 | BC-31 |
BC-32 | BC-31 |
Insure the Cartridge lock levers are down. Reinstall both Cartridges.
|