Canon BJC-55 Printer
Error Codes
Error Condition | Error LED | Power LED | Beeps | Solution |
Paper Pickup | Steady | Steady | 1 | Add paper or restack |
Paper Delivery | Steady | Steady | 2 | Remove any paper jammed |
BJ Cartridge Not Detected | Steady | Steady | 3 | Re-install cartridge or replace it |
Cartridge Mismatch | Steady | Steady | 4 | Install correct cartridge |
No Battery | Steady | Steady | 6 | Install battery |
Low Battery Warning | Steady | Steady | Long / Short | Charge battery |
Manual Feed Error | Blinks | Steady | 1 | Check paper |
Low Ink | Blinks | Steady | 2 | Replace cartridge |
Cartridge Error | Blinks | Steady | 3 | Check/Reinstall cartridge, replace cartridge |
Low Battery Warning | Blinks | Steady | 4 | Charge battery |
Waste Full Warning | Blinks | Steady | 5 | Waste is almost full , printer needs service |
Failed Battery Warning | Blinks | Steady | 6 | Replace battery |
Service Errors | Blinks | Blinks | 1-12 | Requires service |
Waste Error Reset
Many thanks to Vince Gyver for sending this in.
- Unplug Power Cord
- Remove the Battery
- While pressing and holding the RESUME Button plug in Power Cord
- After two seconds press the POWER Button
- Release Buttons immediately (as soon as the led light)
- Press and hold CARTRIDGE, RESUME and POWER Buttons
- Release all Buttons after the beeps (POWER LED will be off, Charger LED will light orange)
- Press CARTRIDGE 16 times (POWER LED and Charger LED will light alternately after each press)
- Press RESUME (Printer will automatically power off)
- Put Battery back in the tray
- Power On and have fun with your Printer (Don't forget to replace or clean the Waste Tank Pad!!!)
|