UKT Support logo

Home
What's New
Message Board
Contact Us

Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.


Easy Salon Management

File Extensions
Humour
Links
Microsoft
Reference
Scanner Support





 


Canon BJC-4650 Printer

General

Alternative Drivers

Drivers you can use if the BJC-4650 driver is not available.

  • DOS : BJ-200/200e/200ex (BJ Mode/Black)
  • DOS : Epson LQ2550 (LQ Mode Colour/Black)

Cartridges

  • BC-20 - Black Ink
  • BCI-21bk - Black Ink Tank (BC-21)
  • BCI-21c - Tri Colour Ink (BC-21)
  • BC-21e - Colour Print Head
  • BC-22e - Photo Ink
  • BC-29f - Fluorescent Ink

Cleaning Print Head

With the printer online, hold down the RESUME button for 2 beeps.

Self Test

Demo Test : Switch Printer off. Hold down power button for 1 beeps. Press RESUME to stop.
Status Test : Switch Printer off. Hold down power button for 2 beeps. Press RESUME to stop.
Ripple Test : Switch Printer off. Hold down power button for 3 beeps. Press RESUME to stop.
Nozzle Test : Switch Printer off. Hold down power button for 4 beeps. Press RESUME to stop.

Known Issues

When an image is scanned, it prints 4 times bigger then the page

This happens when you are using PAINT to print from. Use the software that came with the scanner or use any graphical/Desk Top Publishing software.

"Error D210 your ColorSync or Canon profiles...."

I've just installed Mac OS 8.5 and my printer will no longer work.

Firstly make sure you are using v2.04 or higher printer drivers. It may also be caused by the coloursync profiles have been installed by the installer in the incorrect location. Previous versions of the MAC OS install into system\preferences\colorsync profiles. MacOS 8 and above now has the default location in system\colorsync profiles. The fix is to move all the profiles into system\colorsync profiles.

Problems with Cartridge Detection

  • Power off the printer
  • Unplug the printer's power cord, wait 5 seconds then replug the power cord in.
  • Hold the Power button for 6 Beeps
  • Release the Power Button

This will reset the printer and should resolve incorrect cartridge detection problems.

Error Codes

Power/ErrorIndicator
Colour
BeeperError/CauseSolution
Off  No Power 
OnGreen Ready State 
OnOrange1Paper Pickup Error or out of paperAdd Paper or clear paper jam and press Resume
OnOrange2Paper JamClear paper jam and press Resume
OnOrange5Cartridge Mode MismatchWhen wrong cartridge is installed for Printing or Scanning.
BlinksGreen1Cartridge Not detectedInstall or replace cartridge. You will notice the carriage will be in the middle postion.
BlinksGreen<>Orange1RAM ErrorUnplug the printer for 20 seconds, if problem persists then printer Requires a Service.
BlinksGreen<>Orange2ROM ErrorUnplug the printer for 20 seconds, if problem persists then printer Requires a Service.
BlinksGreen<>Orange3BJ Cartridge Displacement errorTry replacing the Cartridge or Requires Service
BlinksGreen<>Orange4Home Position ErrorRemove the cartridge and check to make sure nothing is blocking the path of the carriage, if not then the printer requires a service
BlinksGreen<>Orange5Waste FullRequires Service
BlinksGreen<>Orange6Temperature Sensor ErrorTry replacing the Cartridge or Requires Service
BlinksGreen<>Orange7Print PositionUnplug the printer for 20 seconds, if problem persists then printer Requires a Service.
BlinksGreen<>Orange8-9Head temperature or sensor errorTry replacing the Cartridge or Requires Service
BlinksGreen<>Orange10Cleaning ErrorRemove the cartridge and check to make sure nothing is blocking the path of the carriage, if not then the printer requires a service
BlinksGreen<>Orange11Scanner Cartridge IS-22 DisplacementOccurs when the IS scanner cartridge is detected but cannot correctly identify it, Try resetting the IS cartridge

Waste Error Reset

Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME