Canon BJC-35v Printer
General
Cartridges
- BCI-10 - Ink Tank (Black)
- BC-10 - Print Head
- BCI-11 Black - Ink Tank (Black BC-11)
- BCI-11 Colour - Ink Tank (Tri Colour BC-11)
- BC-11e - Print Head (Colour)
Error Codes
Error | Cause | Solution |
C1 | Waste Ink Warning | Press Online to continue printing, Note to stop this error you are require to take the printer in for service. |
C5 | Low Battery Warning | Try recharging the battery |
E1 | Paper Pickup Error or out of paper | Add Paper or clear paper jam and press the ONLINE button. |
E2 | Paper Delivery Jam | Clear paper jam and press the ONLINE button. |
E6 | Not detecting the print head | Install the print head or replace it |
FC | Low Battery Error | Try recharging the battery, if this fails replace the NiCAD battery |
F12 | PrintHead Temperature Error | Try installing a NEW print head, if the problem continues the printer requires service |
F13 | Print Head Installation Error | Try installing a NEW print head or reinstalling the print head, if the problem continues the printer requires service |
F14 | Waste Ink is Full | Requires Service. See below to reset. |
Online button is blinking | Cartridge/Printhead not detected | Check and see if the printhead is sitting in the midde. Typically means replacement of the printhead, try reseating the printhead |
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then replug printer
|