UKT Support logo

Home
What's New
Message Board
Contact Us

Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.


Easy Salon Management

File Extensions
Humour
Links
Microsoft
Reference
Scanner Support


 


Canon BJC-1000 Printer

General

Cartridge

  • BC-02 - Black Ink & Integral Print Head
  • BC-05 - Colour Ink & Integral Print Head
  • BC-06 - Photo Ink & Integral Print Head
  • BC-09f - Fluorescent Ink & Integral Print Head

Serial Number

Location - Cream coloured label on the rear of the printer, centre back of sheet feed.

Error Codes

The BJC-1000 does not beep or have any LEDs to indicate errors. All errors are reported via the computer with error messages.

Error ConditionError Indication
on Computer
Error
Code
Possible Solution
Paper FeedThe Printer is out of paper Add Paper
Paper JamA paper jam has occurred Remove any paper jammed
EEPROMAn error that possibly requires a service call has occurred6800Try unplugging the printer for 30 seconds, if not requires a service.
Home PositionAn error that possibly requires a service call has occurred5000Make sure no obstructions are blocking the cartridge movement, if not needs service.
Temperature SensorAn error that possibly requires a service call has occurred5400Try unplugging the printer for 30 seconds, if not requires a service.
No Cartridge ErrorAn error that possibly requires a service call has occurred5600Try reinstalling Cartridge or replacing the cartridge
Waste FullAn error that possibly requires a service call has occurredNoneNeeds Service
Cleaning ErrorAn error that possibly requires a service call has occurred5C00Make sure no obstructions are blocking the cartridge movement, if not needs service.

Waste Error Reset

1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.