UKT Support logo

Home
What's New
Contact Us


Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.

File Extensions
Humour
Links
Microsoft
Reference
Scanner Support





 


Advent T9203 PC


CPUIntel Pentium 4 560 (3.6 GHz)
MotherboardMS 7046
Memory512MB DDR PC-3200 RAM (4 memory slots. Max 4GB)
Hard Drive250GB SATA
250GB SATA
CD DriveLite-On SOHW-1653S DVD-RW
LiteOn SOHD-167T DVD-ROM
Floppy DriveFloppy disk drive fitted
Video CardATI Radeon x600 Pro 256MB PCI Express
TV CardAverMedia 'A16C-D' hybrid TV Tuner
Sound CardCMedia CMI9880L
Network CardVIA Rhine III VT6105
Creatix 405 PCI 802.11g wireless
ModemC-Com 5619PSV-R
Ports - Front1x 7-in-1 Card Reader
1x Firewire (IEEE 1394)
2x USB 2.0
1x Headphone
1x Microphone
Ports - Back1x PS/2 Keyboard
1x PS/2 Mouse
1x Serial
1x Parallel
1x S/PDIF Digital Input
4x USB 2.0
1x LAN
1x Firewire (IEEE 1394)
1x Rear Surround
1x Audio in
1x S/PDIF Digital Output
1x Front Speakers
1x Wide Surround
1x Centre/Subwoofer
1x DVI Output
1x 7-pin S-Video output
1x VGA
1x Modem
1x TV Antenna
1x FM Radio Antenna
1x Wireless LAN Antenna
CaseAdvent AIRXL
KeyboardAdvent wireless keyboard
MouseAdvent wireless mouse

Case Disassembly

Remove 2 screws from right rear of case, then slide the side of the case backwards. The panel is a tight fit and may require firm pressure to remove. The front bezel has to be removed before the drives can be slid out. It is retained by 4 clips.


Drivers

Your PC should have a backup copy of all the drivers, you can find it by browsing to the c:\applications\drivers folder.


Motherboard Diagram

ms7046 Diagram


In the Box

Disks Supplied

  • Microsoft Works 8 CD

Items Supplied

  • Advent base unit
  • Advent keyboard and optical mouse
  • Advent USB keyboard and mouse RF receiver
  • UK mains power cable
  • UK modem cable
  • External wireless LAN antenna
  • S-video to composite TV out converter
  • RF Receiver for power cinema remote control
  • Power cinema RF remote control

Documentation Supplied

  • Advent SP2 users manual
  • Microsoft Windows XP "Start here" Guide
  • Cyberlink PowerDVD product key
  • RF remote control setup instructions

Recovery Disc

Due to the nature of the recovery process you should not use FDISK or any other partition management software to delete the partition on your Advent computer. Doing so will prevent the recovery from functioning correctly.

Using the HDD Recovery System

Your Advent computer uses the latest recovery system that doesn't require any CDs or DVDs to restore your PC to it's original factory condition.

  • There are two ways to start the recovery -
    • Restart your computer. Then Press F10 repeatedly until the message "Starting System Recovery" is displayed.
    • In Windows by clicking: Start / All Programs / System Recovery / System Recovery.
  • The recovery will load and display a box with one option:
    • Non-destructive recovery: this option will restore Windows, supplied applications, and drivers. This option will not destroy your documents or programs. These will be backed up along with the registry. These are restored at the end of the recovery process.
    To access the recovery options below that erase all data from the computer, click the Advanced button.
    • System Recovery - No format: this will reinstall Windows, supplied applications and drivers. It will move your files to a folder called "My old disk structure". Any applications (except those supplied) will need to be reinstalled.
    • System Recovery - Quick format: this option will erase your hard drive including your personal files. Windows, supplied applications and drivers will be reinstalled.
  • Select the Non-destructive recovery option and press Next.
  • You will be informed about System Restore in Windows, click Yes.
  • The recovery will begin. Once this is complete click Restart.

Additional information

Press the ALT and D keys at the recovery menu to access a command prompt. This will allow access to C: drive. The command prompt will default to c:\minint\system32 where you can run a variety of tools including CHKDSK.EXE.

Reinstalling applications

From version 2.x of the recovery system onwards you can install applications from the c:\applications folder. Drivers can be installed from the c:\applications\drivers folder and utilities from the c:\applications\tools folder. You will still need to install Microsoft Works from the supplied CD.

Using the Recovery Media

If the HDD recovery doesn't work then you can recover from the discs you should have created. To use the discs (This will completely erase all your data) -

  • Start the computer with the recovery CD or DVD in the DVD drive
  • If the HDD already has the recovery partition in place, then you will get a screen with two options.
    • Press ‘F’ . This will delete & recreate the recovery partition, then restore the user partition. Do not choose option 'R' at this screen. If you select ‘R’ from the recovery CD start-up options, then this will first check to see if the recovery partition is present on the HDD. If the recovery partition is on the HDD, then the PC will load into the recovery options screen from the recovery partition, and not from the recovery CD/DVD set.
  • If a blank HDD has been put into the machine (or there are no partitions on the HDD), then you will only get the option to press 'R'. In this case, just press 'R' , and this will create the recovery partition.
  • When all data is copied to the recovery partition, then the user partition is created and formatted.

How can I make a backup of the pre-installed software?

The Recovery Media Creator will remind you to create your recovery media every time you start Windows, unless you tell it to stop reminding you, dismiss it, or create the media.

To access the Media Creator start into Windows as usual, then Click Start / All Programs / System Recovery / Recovery Media Creator.

  • You will be presented with a “Welcome” screen. Click Continue.
  • You will be shown some information about the creation process. Click Continue and follow the on-screen instructions.
  • Click Start Creation to create your System Recovery CD Set.
  • The recovery creation software will advise you how many blank CDs/DVDs you will need to create your System Recovery set. A DVD has a much higher capacity than a CD and will require less discs.
  • You will then be asked to insert a blank disc into your computer. Label this CD “Recovery CD 1” and then insert it into your DVD/CD Rewriter drive.
  • Once you have inserted your blank disc the process should continue – If it does not, click OK to continue.
  • The creation process will continue until you are prompted for a 2nd CD. Label this CD “Recovery CD 2” and then insert it into your DVD/CD Rewriter drive.
  • Once the disc creation has completed you will see a “Congratulations” screen. Click OK and the program will exit.
  • You have now created a complete set of Recovery disc(s) for your computer. These discs will allow you to restore your computer in case of any problems with your Windows XP software.
  • Keep these discs in a safe place.