Advent 8204 PC
CPU | Intel Pentium 4 1.7 GHz |
Motherboard | Intel Garibaldi D850GB (Tehama chipset) |
Memory | 128MB PC800 RDRAM (4 memory slots. Max 2GB) |
Hard Drive | 61 GB Maxtor 96147H6 |
CD Drive | 4x 4x 24x Toshiba combi SD-R1002 DVD/CD-R/RW Iomega zip drive (internal) |
Floppy Drive | Floppy disk drive fitted |
Video Card | nVIDIA Geforce2 MX 400 32MB |
Sound Card | Creative SoundBlaster Live! |
Speakers | Cambridge SoundWorks DTT 2200 |
Modem | LT Winmodem V.90 56K |
Case | Advent ATX case |
Keyboard | Multimedia keyboard (PS/2) |
Mouse | Microsoft IntelliMouse |
Case Disassembly
Remove the 4 retaining screws and using the hand grips, slide the panels off the unit . To remove the bezel release the plastic retaining clips located on both sides of the inside of the chassis. The floppy and CD drives can be removed by removing the cables at the rear and releasing the retaining clips. Keeping the clips depressed, pull the units out the front of the case.
Drivers
You can install individual drivers by using the recovery disc. Insert the CD and allow it to load. When the menu appears, click the appropriate button and follow the instructions to complete the installation.
Motherboard Information
- Form Factor: ATX
- CPU Support:
- Intel Pentium 4 processor
- Supports 423-pin Pin Grid Array (PGA) package.
- 400-MHz system bus
- Memory:
- Four RDRAM RIMM Sockets
- Supports fast PC800 and PC600 RDRAM memory from 128MB to 2GB
- Chipset: Intel 850
- Connectors:
- 1x AGP 4X 1.5V
- 5x PCI slots
- 4x USB
- 1x CNR
In the Box
Disks Supplied
- Advent recovery CD ME1
- Advent supplementary CD for 8204
- Microsoft Works Suite 2000 (with Word 2000)
- PowerDVD 3.0
- Advent software bundle
Items Supplied
- Base unit
- PS/2 Internet keyboard
- PS/2 Microsoft IntelliMouse
- Cambridge SoundWorks DTT 2200 5.1 speakers
- iOmega 100 MB zip drive
- Mains power cable
- UK modem cable
Documentation Supplied
- Topsheet - setting up your computer
- Advent 8000 series manual
- Getting started with Microsoft Windows Me
- CD recovery procedure
- Freeserve preload leaflet
Recovery Disc
Information on the Advent ME1 recovery process.
Insert the ME1 recovery CD into your CD or DVD drive. Restart the computer and wait for the follwoing menu to load:
- Restore Windows system files. This will restore Windows system files only, the user's files will not be affected.
- Recover current Windows. This will reinstall Windows files only, again users files and installed applications will not be affected.
- Quick Restore System- No format. This will reinstall your operating system while keeping the users data intact however any Windows applications and settings will require reinstalling. The original copy of Windows will be backed up to directory on the HDD.
- Quick Restore System- Quick Format. This will format the Hard drive and reinstall the operating system. All of the user's data will be lost.
To run a full recovery select "Quick Restore System - Quick Format". Please note that all your data will be lost. The recovery will now begin. Once the first CD is loaded you will be asked to insert your Supplement CD. At the end of the process remove the Supplement CD and allow the computer the restart.
If the mouse does not work...
Occasionally when attempting to recover an Advent PC with ME1 and Supplementary CD the mouse pointer does not appear on the options screen. It is currently unknown what causes this, however, it is still possible to recover the system using the keyboard shortcuts as shown below:
- Press the TAB key twice.
- At this point you should notice a dashed highlight over the Restore Windows system files option and a black dot in the radio button next to it.
- Using the up and down arrow keys select the required option. For complete recovery of the PC press the down arrow three times to highlight the last option Quick Restore System- Quick Format.
- Press TAB once to highlight Next then press Enter. This will start the recovery process.
- To exit from the restore procedure while still in this menu press TAB once to highlight Exit. (This assumes you are pressing TAB while Next is highlighted).
Driver installation
You can install individual drivers from the ME1 CD. Insert the CD and allow it to load. When the menu appears, click the appropriate button and follow the instructions to complete the installation.
|