Advent 3118 PC
CPU | Intel Pentium 4 3.06 GHz (Northwood) |
Motherboard | ECS SF2 |
Memory | 512MB DDR PC2700 RAM (2 memory slots. Max 2GB) |
Hard Drive | 120GB Samsung SpinPoint SV1203N |
CD Drive | Lite-On XJ-HD166 16x(48x) DVD-ROM Lite-On LTR-52327S 52x CD-RW |
Floppy Drive | Floppy disk drive fitted |
Video Card | nVIDIA GeForce FX 5200 (128MB) |
Sound Card | Realtek AC'97 audio |
Speakers | Advent SP-120N |
Modem | Conexant PCI HSPi V.92 (CX11252-11) |
Network Card | Realtek 8139 / 810X (Onboard) |
Ports - Front | 1x 7-in-1 Card Reader 1x IEEE 1394 (FireWire) 2x USB 1x Headphone 1x Microphone |
Ports - Back | 1x PS/2 Mouse 1x PS/2 Keyboard 1x Parallel 1x Serial 1x IEEE 1394 (FireWire) 4x USB 1x LAN 1x Line-in 1x Line-out 1x Microphone 1x VGA 1x S-Video 1x DVI 1x Telephone 1x Modem |
Case | Jupiter |
Keyboard | Advent PS/2 keyboard |
Mouse | Advent PS/2 mouse |
Case Disassembly
Release the side of the case by removing the 2 screws on the right hand side at the back.
Drivers
Your PC should have a backup copy of all the drivers, you can find it by browsing to the c:\applications\drivers folder.
Motherboard Information
- Form Factor: microATX. Size: 244*230mm. Layer: 4 layers
- CPU Support: Socket type: P4 Socket478. Type: 1.5G/1.6G/1.7G…2.8G and above.
- System Memory: Module Speed: DDR266 / DDR333/ DDR400. Socket Type: Two DDR 184-pin unbuffered DIMM sockets. Maximum Memory size: 2GB.
- Core Logic (Chipset): North Bridge: SiS661FX Host interface controller.
- AGP controller : AGP 3.0 compliant. 1.5V AGP Interface. AGP 8X/4X Interface.
- IO Controller: South Bridge: SiS964 / 964L
- Audio Chipset: AC’97 Audio Codec Compliant with AC'97 v2.2 specification
- Connectors:
- IDE Headers: Two 40-pin IDE low profile headers
- Devices: Up to 4 IDE devices Speed: PIO mode, ATA100/133 1.8. Serial ATA
- Revision: Serial ATA V1.0 Compliant
- Connectors: Two 7-pin SATA connectors
- Devices: Up to 2 SATA devices
- Speed: 1.5Gbps 1.9. Audio Connectors and Headers Real Audio
- Connector: Line Out, Line In, Microphone In
- One CD-in header (4*1)
- One Aux-in header (4*1)
- One Intel specification audio header (5*2) 1.10.
Jumpers
JP1 - Clear CMOS. 1-2: Normal, 2-3 Clear
JP3 - BIOS Protection. 1-2: Write Enabled, 2-3 Write Disabled
In the Box
Disks Supplied
- Advent system restore CD ver. 3.0
- Microsoft Works 7.0
Items Supplied
- Advent base unit
- Advent multimedia USB or PS/2 keyboard
- Advent optical USB or PS/2 mouse
- UK mains power cable
- UK modem cable
- Advent stereo speakers and power supply
- TV-out cable
Documentation Supplied
- Advent setup topsheet
- Advent manual
- Microsoft Windows XP Home Edition "Start here" guide
Recovery Disc
To recover your Advent PC you will need your Advent System Recovery CD.
- Place the CD into the DVD drive and restart your computer.
- Press R on the keyboard when prompted.
- The recovery will load and display a menu of options:
- Non-destructive recovery: this option will restore Windows, supplied applications, and drivers. This option will not destroy your documents or programs. These will be backed up along with the registry. These are restored at the end of the recovery process.
- System Recovery - No format: this will reinstall Windows, supplied applications and drivers. It will move your files to a folder called "My old disk structure". Any applications (except those supplied) will need to be reinstalled.
- System Recovery - Quick format: this option will erase your hard drive including your personal files. Windows, supplied applications and drivers will be reinstalled.
- Select the Non-destructive recovery option and press Next.
- You will be informed about System Restore in Windows, click Yes.
- The recovery will begin. Once this is complete you should eject the CD and click Restart.
Due to the nature of the recovery process you should not use FDISK or any other partition management software to delete the partition on your Advent computer. Doing so will prevent the recovery from functioning correctly. If the recovery asks for a second CD you will need to obtain an Update CD from Advent.
Additional information.
Press the ALT and D keys at the recovery menu to access a command prompt. This will allow access to C: drive.
The command prompt will default to E:\i386\system32 where you can run a variety of tools including CHKDSK.EXE.
Pressing CTRL + BACKSPACE at the ‘Press R to display system recovery options’ will display the manufacturers hidden menu. This menu contains a number of tools to delete or recreate the partitions on the hard disk drive.
Reinstalling applications
From version 2.x of the recovery system onwards you can install applications from the c:\applications folder. Drivers can be installed from the c:\applications\drivers folder and utilities from the c:\applications\tools folder. You will still need to install Microsoft Works from the supplied CD.
|