Advent 3104 PC
CPU | AMD Athlon 1.0GHz |
Motherboard | Gigabyte GA-71XE |
Memory | 128 MB PC133 SDRAM |
Hard Drive | 20 GB Maxtor 32049H2 |
CD Drive | 12 x Toshiba SD-M1402 DVD ROM |
Floppy Drive | Floppy disk drive fitted |
Video Card | nVIDIA Riva TNT2 M64 32MB |
Sound Card | Creative Soundblaster 64v PCI |
Speakers | Creative Labs SBS35 |
Modem | Lucent 56K V.90 Winmodem |
Ports (rear) | 1x PS/2 Keyboard 1x PS/2 Mouse 2x Serial 1x Parallel 2x USB 1x VGA 1x Headphone 1x Microphone 1x Line-in 1x Games Port |
Case | Advent ATX case |
Keyboard | BTC internet keyboard (PS/2) |
Mouse | Standard PS/2 mouse |
Case Disassembly
Remove the retaining screws and slide the case away. To remove the bezel release the plastic retaining clips located on both sides of the inside of the chassis.
Drivers
You can install individual drivers by using the recovery disc. Insert the CD and allow it to load. When the menu appears, click the appropriate button and follow the instructions to complete the installation.
Motherboard Information
- Form Factor: ATX, 4 layer PCB (30.5*20.8cm)
- CPU Support:
- Slot A for AMD K7 Athlon 200MHz FSB processors
- 90/95/100/105/110/115 MHz FSB
- Auto detect CPU voltage
- System Memory:
- 16MB to 768MB DRAM size
- 3 x 3.3V DIMM sockets
- Supports 64/128/256 MB SDRAM DIMM module
- Supports ECC type DIMM module (72bits)
- Chipset:
- AMD 751 (Irongate) North Bridge
- AMD 756 (Viper) South Bridge
- Winbond W83977 I/O set
- Winbond W83782 health chip
- IO Controller:
- 2x Ultra DMA 33/ 66 Bus Master IDE ports on board
- 1x FDD, 2x COM, 1x LPT, 1x PS/2 Keyboard, 1x PS/2 Mouse on board
- 2x USB ports on board
- 2x USB ports by cable (cable optional)
- 1x IrDA TX / RX Header (optional)
In the Box
Disks Supplied
- Advent recovery CD ME 1
- Advent 3104 supplement CD
- PowerDVD 3.0 (serial number on CD sleeve)
- Microsoft Works 2000
Items Supplied
- Advent base unit
- UK mains power cable
- UK modem cable
- Creative SBS35 stereo speakers
- Internet keyboard (PS/2)
- 2 button scroll mouse (PS/2)
Documentation Supplied
- Top sheet - setting up your computer
- Advent 3000 series user manual
- "Getting started with Microsoft Windows Me"
- Freeserve leaflet
- CD recovery procedure leaflet
Recovery Disc
Information on the Advent ME1 recovery process -
Insert the ME1 recovery CD into your CD or DVD drive. Restart the computer and wait for the follwoing menu to load:
- Restore Windows system files. This will restore Windows system files only, the user's files will not be affected.
- Recover current Windows. This will reinstall Windows files only, again users files and installed applications will not be affected.
- Quick Restore System- No format. This will reinstall your operating system while keeping the users data intact however any Windows applications and settings will require reinstalling. The original copy of Windows will be backed up to directory on the HDD.
- Quick Restore System- Quick Format. This will format the Hard drive and reinstall the operating system. All of the user's data will be lost.
To run a full recovery select "Quick Restore System - Quick Format". Please note that all your data will be lost. The recovery will now begin. Once the first CD is loaded you will be asked to insert your Supplement CD. At the end of the process remove the Supplement CD and allow the computer the restart.
If the mouse does not work...
Occasionally when attempting to recover an Advent PC with ME1 and Supplementary CD the mouse pointer does not appear on the options screen. It is currently unknown what causes this, however, it is still possible to recover the system using the keyboard shortcuts as shown below:
- Press the TAB key twice.
- At this point you should notice a dashed highlight over the Restore Windows system files option and a black dot in the radio button next to it.
- Using the up and down arrow keys select the required option. For complete recovery of the PC press the down arrow three times to highlight the last option Quick Restore System- Quick Format.
- Press TAB once to highlight Next then press Enter. This will start the recovery process.
- To exit from the restore procedure while still in this menu press TAB once to highlight Exit. (This assumes you are pressing TAB while Next is highlighted).
Driver installation
You can install individual drivers from the ME1 CD. Insert the CD and allow it to load. When the menu appears, click the appropriate button and follow the instructions to complete the installation.
|