Advent 7013 Laptop

Specification

Drivers

Your laptop should have been supplied with a "Utility and Driver CD" which contains a backup copy of all the drivers.

Memory Upgrades

Many thanks to John Thomson for the following info.

Remove the keyboard by releasing the 3 retractable clips at the front of the keyboard with a small screwdriver (these should be below the 'Fn', the 'Alt Gr', and the 'Down Arrow' keys). When removing the keyboard be careful not to damage the strip cable at the back.

Undo and remove 2 small screws securing memory cover plate (on right hand side). Remove cover plate.

Insert the upgrade into the free slot at a slight angle (The slot in the PCB edge showd the correct way). Make sure it is fully home in the connector before applying downward pressure to secure it into the retaining clips. Refit cover, clip K/B back in.

Reboot M/C, and right click on My Computer, General Tab, and check that M/C has picked up the extra memory

Bottom of Laptop

1. Hard disk drive
2. Battery pack
3. Battery pack release
4. CPU access
5. CPU fan

Function Keys

Fn + F1 - Enters Suspend Mode
Fn + F3 - Turns Battery Warning Beep on or off
Fn + F4 - Changes Display Mode: LCD-only, CRT-only and LCD&CRT
Fn + F5 - Turns Speaker Volume up
Fn + F6 - Turns Speaker Volume down
Fn + F7 - Increases Display Brightness
Fn + F8 - Decreases Display Brightness
Fn + Num Lock - Enable/Disable Numeric Keypad

In the Box

Disks Supplied

• Advent 7013 recovery CD x 3
• Notebook utility CD, version 0.9
• Nero burning ROM CD, version 5.5 OEM
• PowerDVD CD, Version 4.0 XP

Items Supplied

• Advent 7013 Notebook
• Mains power adapter
• Mains power cable
• UK modem cable
• BT connector

Documentation Supplied

• User manual
• "Windows XP start here" guide

Recovery

A Bootable Recovery CD is supplied with these machines. To recover the system:-

• Insert CD into the drive.
• Reboot the PC.
• A warning message prompting the user to backup data before proceeding.
• Press Y to continue.
• A final warning that all data will be erased is displayed.
• Press Y to continue.
• Finally a message "Remove CD-ROM when prompted" is displayed.
• Press Y to continue.
• The image file will load. Once complete the user is prompted to remove the CD and press CTR + ALT + DEL to restart.

Driver CD

The notebook is supplied with a Utility CD. This can be used to restore corrupt drivers. The folders on the CD contain the following -

• Driver: Drivers for all the hardware.
• Manual: This folder contains individual PDF files for each chapter
• Utility: Flash BIOS Utilities, HDPrepare, QKey

FAQ

How Do I Remove the DVD Drive?

Thanks to Tony Castles for the following info -

• Remove HDD
• Lift out keyboard (see "Memory Upgrades" section above)
• Remove large screw in centre of plate
• Push CD/DVD drive out using the side exposed under the HDD
• CD/DVD fascia secured by single (black) screw, then pull off

How Do I Access the CMOS Battery?

As far as I know to get to the CMOS Battery you need to remove the hard disk drive.