UKT Support logo

Home
What's New
Contact Us


Search the Site
powered by FreeFind

Acer
Advent
Amstrad
Apple
Canon
Compaq
CTX
Epson
Hewlett Packard
Mitsubishi/Apricot
Packard Bell
Other Manufact.

File Extensions
Humour
Links
Microsoft
Reference
Scanner Support





 


Advent 6650 Laptop

Specification

CPUIntel Pentium Dual-Core T3400 (2.16GHz)
BIOSPhoenix BIOS. Press F2 to enter
ChipsetIntel GL40 Express
Memory2GB DDR2 667MHz SODIMM (2 memory slots. Max 4GB)
Hard Drive160GB
CD DriveTSSTcorp CDDVDW TS-L633A
Screen17" Widescreen TFT (native resolution 1440x900)
Video CardIntegrated Intel GL40 Express Chipset Family
Sound CardRealtek ALC662 High Definition Audio
Network CardRealtek RTL8102E (Onboard)
MSI MN54G 802.11bg Wireless G Mini PCI Card (MS-6877)
Ports1x Headphone
1x Line-in
1x Microphone
1x Expresscard slot
1x Card Reader
2x USB 2.0
1x DVI
1x Kensington Lock
1x LAN
1x eSATA *
BatteryU40-4S2200-C1M3 (14.8v 2200mAh)
U40-4S2200-G1L3 (14.4v 2200mAh)
Size27.8 x 287 x 402mm (HxWxD)
Weight3.4kg
ColourBlack
Made ByF71IL1

* The eSATA port also doubles up as a 3rd USB port.


Drivers

Your laptop should have been supplied with a Utility CD which contains a copy of the user manual and all the drivers.


Memory Upgrades

This laptop has two memory slots. One slot is accessed by removing the cover underneath the laptop (see the "Bottom of Laptop" section below), the other slot is hidden somewhere under the keyboard though I'm not sure how you get to it.


Bottom of Laptop

6553 underneath


Function Keys

Fn+F1 - Put the laptop into Suspend Mode
Fn+F2 - Eco Mode (where supported by processor)
Fn+F3 - Mute/UnMute Sound
Fn+F4 - Change display mode - Laptop Screen/ External display/ Laptop and External display
Fn+F5 - Increase the speaker volume
Fn+F6 - Decrease speaker volume
Fn+F7 - Increase brightness
Fn+F8 - Decrease brightness
Fn+F9 - Enable/ Disable touchpad
Fn+F10 - Enable/ Disable Wireless
Fn+F11 - Enable / disable webcam


In the Box

Disks Supplied

  • Microsoft Works SE 9.0
  • Notebook drivers CD
  • Advent Recovery Disks (2xDVDs)

Items Supplied

  • Advent 6650 notebook
  • Mains power adapter
  • Mains power cable
  • Advent Welcome Pack

Documentation Supplied

  • Advent Setup Guide
  • Your Guide to Microsoft Windows Vista
  • Advent Troubleshooting and Recovery Manual
  • Advent Safety & Regulations Manual
  • International Support numbers leaflet
  • Integrated Webcam addendum

Recovery Disc

Hard Drive Recovery

Should your Windows develop serious errors or fail to start, you can restore your computer back to factory settings by using the hard drive recovery located on a hidden partition on the hard drive.

To restore your computer back to factory settings, follow the steps below:

  1. Turn on the computer and keep tapping F8 until the advanced options menu is displayed
  2. Use the up/down arrow keys on the keyboard to highlight Repair Your Computer and press enter to select it
  3. Select the language you wish to install (normally English is the only option)
  4. Once you have chosen your language you will be presented with the available recovery options
    • Microsoft Repair Environment - after choosing the UK keyboard layout you will be asked to choose the Operating System you wish to repair. If Windows Vista is not listed then you cannot repair the OS without doing the full recovery. After choosing Vista the Microsoft Vista startup repair tool will run and attempt to repair any startup problems you are experiencing
    • Reinstall Windows - gives you the options available to reinstall Vista
    • Advanced Options - this launches the diagnostic centre allowing you to run chkdsk, launch notepad or bring up a command prompt
    • Exit & restart computer - Exits withut running the recovery process
  5. To continue with the recovery program you need to choose Reinstall Windows
  6. On the next screen you have the ability to launch Vista System Restore and roll back to a date when Vista was last working ok or to run the Full Destructive Recovery. To continue with the recovery program you need to choose Start Full Destructive Recovery
  7. After choosing the Full Destructive Recovery option you are presented with the warning screen that all data will be lost. It is important to make sure all data has been backed up to disk if possible and to realise this process deletes all data and reverts the machine back to it's default state. To continue with the recovery program you need to tick the box indicating you are aware of data loss
  8. The recovery process will then run through, the computer will restart a couple of times during this. You will also need to go through the Vista "Out of Box Experience", to configure Vista. This is fairly straightforward so just follow the onscreen instructions

DVD Recovery

Should your Windows develop serious errors or fail to start, you can restore your computer back to factory settings by using the Recovery DVD you may have created or been sent.

To restore your computer back to factory settings, follow the steps below.

  1. Start the computer with the Recovery DVD in the optical disc drive
  2. After the usual startup screen has vanished press a key when prompted to load from the DVD
  3. Select the language you wish to install (normally English is the only option)
  4. Once you have chosen your language you will be presented with the available recovery options
    • Microsoft Repair Environment - after choosing the UK keyboard layout you will be asked to choose the Operating System you wish to repair. If Windows Vista is not listed then you cannot repair the OS without doing the full recovery. After choosing Vista the Microsoft Vista startup repair tool will run and attempt to repair any startup problems you are experiencing
    • Reinstall Windows - gives you the options available to reinstall Vista
    • Advanced Options - this launches the diagnostic centre allowing you to run chkdsk, launch notepad or bring up a command prompt
    • Exit & restart computer - Exits withut running the recovery process
  5. To continue with the recovery program you need to choose Reinstall Windows
  6. On the next screen you have the ability to launch Vista System Restore and roll back to a date when Vista was last working ok or to run the Full Destructive Recovery. To continue with the recovery program you need to choose Start Full Destructive Recovery
  7. After choosing the Full Destructive Recovery option you are presented with the warning screen that all data will be lost. It is important to make sure all data has been backed up to disk if possible and to realise this process deletes all data and reverts the machine back to it's default state. To continue with the recovery program you need to tick the box indicating you are aware of data loss
  8. The recovery process will then run through, reinstalling Vista and also recreating the hard drive recovery system for future use.
  9. When it has finished copying files it will ask you to remove the DVD and then restart the computer. It will then go through setting up Vista, you will need to go through the Vista "Out of Box Experience". This is fairly straightforward so just follow the onscreen instructions