Acer V62X Motherboard
System Overview
- System board
- Layers: 4 layers
- PCB Size: ATX size (Length = 30.5cm, Width = 24.4cm)
- Chipsets
- Intel SB82441FX (PCI & Memory Controller)
- Intel SB82442FX (Data Buffer Accelerator)
- Intel SB82371SB (PCI ISA IDE Xcelerator & ISA bridge)
- PCI Local IDE - Embedded in SB82371SB(PIIX3)
- Ultra I/O
- SMC 37C93X/935 APM
- On-chip (SMC 37C93X/935APM) RTC
- On-chip (SMC 37C93X/935APM) keyboard controller
- On-chip (SMC 37C93X/935APM) FDD controller
- System and PCI clock generator - ICW W49C65-22/32 or IMISC672
- System BIOS
- Size: 128KB/256KB
- Type: SST 29EE010/29EE020
- Hardware Monitor function - ADM9264/9268
- Buzzer
- USB connector
- LED board connector for power LED, Reset (or SMM) key and external speaker connector
- IDE LED connector
- Software Shutdown Power Control connector
- IrDA module connector
- Three ISA and four PCI slots, one combo slot
- CPU Type
- Intel Pentium II CPU
- CPU internal speed: 233/266
Jumper Settings
Jumper | Setting | Function |
JP1 - Power On Setting (only for S/W power supply) | 1-2 | Test mode |
| 2-3* | Normal mode |
JP6 - ROM Select | 1-2 | EPROM |
| 2-3 | Flash EEROM & 28F001 |
| Open* | 29EE010/020 |
SW1 (Switch 3) - Password Check | On * | Bypass Password |
| Off | Check password |
SW1 (Switch 4) - BIOS Logo | On | OEM BIOS |
| Off * | Acer BIOS |
CPU select
Jumper | JP3 | JP4 | JP5 |
Pentium Pro | 1-2 | 1-2 | 1-3, 2-4 |
Pentium II | 2-3 * | 2-3 * | 3-5, 4-6 * |
Frequency Select SW1
SW1-1 | SW1-2 | Host Clock | PCI Clock |
On | On | Reserved | Reserved |
Off | On | 60 MHz | 30 MHz |
On * | Off * | 66 MHz | 33 MHz |
Off | Off | XIN/2 | XIN/4 |
Core/Bus Ratio SW1
SW1-5 | SW1-6 | SW1-7 | SW1-6 | Core/Bus Ratio |
On | On | On | On | 2 |
On | On | Off | On | 3 |
On * | On * | On * | Off * | 4 |
On | On | Off | Off | 5 |
On | Off | On | On | 2.5 |
On | Off | Off | On | 3.5 |
On | Off | On | Off | 4.5 |
On | Off | Off | Off | 5.5 |
Off | On | On | On | 6 |
Off | On | Off | On | 7 |
Off | On | On | Off | 8 |
Off | Off | On | On | 6.5 |
Off | Off | Off | On | 7.5 |
Off | Off | On | Off | 1.5 |
Off | Off | Off | Off | 2 |
Off | On | Off | Off | Reserved |
Connector Functions
Connector | Function |
CN1 | Power connector |
CN3 | USB port(s) |
CN4 | PS/2 keyboard port |
CN5 | In-Target Probe (ITP) debug port |
CN6 | PS/2 mouse port |
CN7 | Parallel/printer port |
CN9 | COM1/2 port(s) |
CN10 | HDD channel 2 connector |
CN11 | HDD channel 1 connector |
CN12 | InfraRed (IrDA) connector |
CN13 | FDD connector |
CN14 | Multifunction connector
Pins 2-6 - Power LED Pins 7-8 - Reset Pins 1-3 - Speaker |
JP2 | Standby power cable connector |
JP8 | Software power control connector |
JP7 | HDD LED connector |
Memory
Has 3 banks of 2 SIMM sockets, which will accept 4-/8-/16-/32-/64-MB SIMMs up to a maximum of 320MB (Acer's memory chart only went as high as 2x32MB, 2x64MB, 2x64MB, so I don't know if the board will accept all banks filled with 64MB SIMMs). Each bank must contain two identical chips (ie 2x 4MB or 2x8MB) though memory can differ between banks.
Issue - After upgrading memory beyond 64MB the memory count only shows 32MB or 64MB. This is a known problem and can be cured by downloading the latest version of the BIOS from Acer's website.
Cache
You might notice that the board does not come with an external second-level cache. This is because the second-level cache is already integrated in the Pentium II CPU card. The CPU card may come with 256-KB or 512-KB second-level cache size. Cache is not upgradeable.
|