Acer V66M Motherboard
Jumper and Connector Layout
V66M - CPU Switch Settings
Ratio (CPU Speed) | SW1 | SW2 | SW3 | SW4 |
2 | On | On | On | On |
3 | On | On | Off | On |
4 (400) | On | On | On | Off |
5 (500) | On | On | Off | Off |
5/2 | On | Off | On | On |
7/2 (350) | On | Off | Off | On |
9/2 (450) | On | Off | On | Off |
11/2 | On | Off | Off | Off |
Jumper and Switch Settings
Jumper | Setting | Function |
JP3 | 1-2 2-3* | KB Turn on Enabled KB Turn on Disabled |
JP6 | 1-3, 2-4 3-5, 4-6 * | Audio Port Func Line-out Speaker-out |
Switch | Setting | Function |
SW5 | On Off | Bypass Password Check Password |
SW6 | | Reserved |
Connector Functions
Connector | Function |
CN2 | ATX Power Connector |
CN5 | Floppy disk drive connector |
CN7 | Wake on LAN (WOL) Connector |
CN8 | CD-in connector |
CN9 | Power SW Connector |
CN10 | Secondary IDE Connector |
CN11 | Primary IDE Connector |
CN12 | Fax/modem connector |
CN13 | Modem Ring Connector |
CN14 | HDD LED Connector |
FN1 | Fan alarm Connector |
FN2 | CPU Fan Connector (2 pin) |
JP1 | CPU temperature detector Connector |
JP2 | System temperature detector Connector |
JP4 | Turbo LED connector (pins 2-3) |
JP5 | Reset switch connector |
JP7 | Power/Suspend LED Connector |
Memory
The system memory is upgradable to a maximum of 384M via three 168-pin DIMM sockets on board. These DIMM sockets accept 16-, 32-, 64-, and 128MB PC100 SDRAMs with Error Correction Code (ECC) feature.
BIOS
How do I access my BIOS?
Resolution: You can access the BIOS by pressing CTRL+ALT+ESC as the system is booting. At the bottom of the second start up screen you should see "To enter setup, press CTRL_ALT_ESC".
Note: If the system displays the Acer Splash Screen, once you hear the beep, you should begin pressing CTRL+ALT+ESC. You may need to press CTRL+ALT+ESC continuously until you access the BIOS setup screen.
|